GF Signet 7310 Switching Power Supplies - Manual

Signet 7310 Switching Power Supplies
Features
• Universal AC input/Full range
• Protections: Short circuit/Overload/Over
voltage
• Cooling by free air convection
• Install on DIN rail TS-35/7.5 or 15
• NEC class 2 / LPS compliant
• Built in DC OK active signal
• LED indicator for power on
• No load power consumption < 1W for
7310-7024 and < 0.75W for others
• 100% full load burn-in test
Signet 7310 Switching Power Supplies provide
regulated output voltage in compact and lightweight
plastic housings for DIN Rail mounting. The series
includes five different output capacities from 0.42A
to 4A (10W to 96W), all of which accept universal AC
line voltage input and meet worldwide standards
for performance and safety. These units meet the
power requirements for a single system, multiple
Signet instruments or other devices requiring 24 VDC
operation.
Compatibility
• Signet Instruments
• Electromagnetic Flow Sensors
• Suitable for Electric Actuated Valves,
including Solenoid
• Suitable for powering passive outputs and
relays
C US