Global Specialties 1504 User Manual
Page 3
INTRODUCTION
ISOLATED VARIABLE AC LINE SUPPLY : MODEL1504
The 1504 Isolated Variable AC Source cum leakage current tester is designed
for modern electronics laboratories which need a clean, electrostatically and
galvanically isolated variable line supply.
The unit is designed to provide isolated output variable from 0 to 150 V AC/4
Amps Max. The output voltage and load current can be monitored on a 3 digit
DPM. The variable isolated output voltage capability makes this unit very
convenient to use for either incoming or outgoing quality control testing. It is also
useful in servicing or circuit design work application, when checking operation
at voltage higher or lower than normal. The unit consists of a super isolation
transformer which is triple shielded from the line to protect against shock
hazards.
The 1504 can measure power line leakage current by means of a probe and a
switch selected range of the output DPM. It can measure leakage currents upto
9.99 mA.
The unit is overload protected by means of an input fuse.