GxT Ferret 74 02 Sensor Probe - Manual

—Read All Instructions Before Using The Analyzer—
Always wear eye protection when testing vehicles. Be extra careful near
batteries and moving parts. Do not lay tools on a battery.
Battery gas is highly explosive.
If a battery explodes fl ush the acid away from skin with generous amounts of
water. Follow up with a neutralizing solution of baking soda and then more
water.
Never use a wrench on the ungrounded battery terminal until the grounded
one has been disconnected. Contact between the vehicle body metal and
the hot terminal can cause sparks to ignite gas or even weld tools into a
battery short circuit.
Keep the space around a battery well ventilated.
Do not make sparks or allow fl ames near batteries.
Before working on a vehicle set the brakes and block the wheels. Beware of
automatic parking brake releases.
Keep your work area well ventilated and free of exhaust.
Avoid electrical shocks caused by getting close to live ignition wires or
touching the coil TACH terminal. A personʼs reaction near a live engine can
be more damaging than the shock.
Keep spark producing devices at least 0.5m (18”) above the fl oor to reduce
the hazard of igniting gasoline vapor.
Do not let test leads wind up in a moving fan or pulley. Route leads away.
Remove fi nger rings and metal wrist bands. They can short terminals and
become very hot from electric current, and cause burns.
SAFETY PRECAUTIONS
E074-01G
FERRET BRAND LIMITED PRODUCT WARRANTY
GxT, Inc. of Cheboygan Michigan, warrants to the original purchaser that FERRET brand
products are free from defects in materials and workmanship for a period of two years from
date of purchase. Our sole obligation for a product within the above warranties will be to
repair or replace, at our option, any defective parts and return the product to the sender
within the U.S.A., shipping prepaid, if it is sent to our Repair Department shipping prepaid
and accompanied by proof of purchase.
This Warranty does not apply to products which have been altered outside the factory; or
repaired by anyone other than the factory or its authorized service centers; or which have
been damaged from accidents, negligence, or abuse; or have been used differently than de-
scribed in the printed instructions. Please note that wear and tear on leads and replacement
of consumable items such as: NOx Sensors, Oxygen Sensors, and paper, is not covered
by warranty.
GxT Inc.ʼs sole liability and buyerʼs exclusive remedy is limited to repair or replacement of the
product as stated in the Limited Product Warranty. THERE ARE NO OTHER WARRANTIES
EXPRESSED OR IMPLIED INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE AND GxT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING FROM THE SALE OR USE OF THE PRODUCT.
Some states do not allow limitations on the length of implied warranties nor exclusion or limita-
tions of incidental or consequential damages, so that the above limitations and/or exclusion
may not apply to you.
This warranty gives you specifi c legal rights and you may also have other rights which may
vary from state to state.
Oxygen Sensor Probe 74
Power
& Select
Button
Battery
Compartment
Lean
Button
Ground
Test Test
Lead
OPERATORʼS MANUAL
© Copyright 2005, GxT, Inc., All Rights Reserved