GxT V555-01, Thermal Printer - Manual

1
OPERATORʼS MANUAL
Installing Printer Paper
16P,44,55P,555
Caution
Do not pull the paper backwards out of
the printer. You will damage the drive
mechanism.
If you experience a paper jam, remove and
reload the paper. Reloading the paper may
remove what is blocking the paper path.
Do not use screwdrivers, pliers, or any other
tools to pry at the printing mechanism. You
will break the printer.
Tear the paper into the shape of an arrow head. Use
a pair of scissors or simply tear the printer paper until
it looks like the picture above.
Feed the tip of the paper into the paper feed slot. It
will slide in easily.
Stop pushing the paper into the printer when the tip
of the paper appears at the exit.
Grasp the tip of the paper and gently pull it through
the printer until the paper is completely loaded. Tear
off the excess paper.
Install the roll of printer paper by pressing the buttons
on the left and right of the paper well while sliding the
paper roll down. When you feel the axles click into
the paper roll, close the printer cover.