Hellwig Air 6016 - Manual (Page 3)

559-734-7451 800-367-5480 FAX 559-734-7460
4. Insert a carriage bolt in the forward square hole
and attach air spring to plate using the 3/8 x 3/4”
flat head cap screw provided. Torque to 20-25 ft-
4
Long End to rear of vehicle
Short End to front of vehicle
This side toward wheel
This side toward center of axle
Front of Vehicle (Pass Side Shown)
3. Lay out base plate as shown in photo. The air spring mounting hole is countersunk
on both sides to allow the plate to be oriented correctly for both the left and right sides
of the vehicle. (Passenger side shown) Attach air spring to plate using 3/8” flathead
bolt. Tighten to 20 ft-lb.
Attach air spring to plate us-
ing countersunk hole.
3
6016 ( R-6016 ) 11/19/2007