Hellwig Air 6016 - Manual (Page 4)

559-734-7451 800-367-5480 FAX 559-734-7460
5. Place heat shield over top of air spring assembly
as shown. (Passenger side shown. Drivers side heat
shield is oriented to front of vehicle) Driver’s side
heat shield must be oriented to keep emergency
brake cable from rubbing on air spring.
6. Place frame bracket over air spring assembly and
attach using 3/8” locknut and washer. Torque nuts to
20 ft-lb. Passenger side shown.
7. Compress air spring assembly and
place on top of the axle pad. MAKE
SURE THAT THE ASSEMBLY
WILL NOT DAMAGE OR CRUSH
BRAKE LINES, WIRING HAR-
NESSES, OR EMERGENCY
BRAKE CABLES.
5
6
7
Axle Pad
6016 ( R-6016 ) 11/19/2007