Hellwig Air 6016 - Manual (Page 6)

559-734-7451 800-367-5480 FAX 559-734-7460
9. It may be necessary to
trim the corner of the
shock bracket 1/16” -
1/8” to allow the plate to
sit flush on axle pad.
Shock Bracket 9
10. When the assembly is aligned
properly, install axle strap using car-
riage bolts and remaining nuts and
washers. It may be necessary to flex
the brake lines slightly to allow clear-
ance for the axle strap. MAKE SURE
AXLE STRAP AND CARRIAGE
BOLT WILL NOT CONTACT
BRAKE LINE. Tighten nuts until the
strap ends flex slightly.
The car-
riage bolts are designed to be long
enough for the 3500 HD installation.
For 2500 HD applications they can be
cut shorter if desired.
10
6016 ( R-6016 ) 11/19/2007