Hydra-Tech S310 - Manual

MODEL S310
1 1/4” (32 mm) Discharge
1 1/4” HYDRAULIC SUBMERSIBLE
SLIM-LINE PUMP
The S310 pump is designed to fit into small
spaces such as 4" well casings, transformer
vaults and bilges. Typical jobs may include
blast hole de-watering, ground water
evacuation and sampling, utility manholes
and marine vessel compartment pumping.
FEATURES
•
Slim Line Design fits Through 4" Openings
•
Efficient Semi-Open Impeller
•
Oil Lubricated Seals (can run dry)
•
Variable Speed hydraulic drive
•
Dependable gear type hydraulic motor
•
Available in all Stainless Steel (S310SS)
•
Safe Hydraulic Drive can be used where
electric power is hazardous or impractical
•
Operates with our HT6 to HT13 power units
or other hydraulic power sources capable
of flows to 6 GPM
C0310
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
: www.hydra-tech.com E-Mail : [email protected]
WEIGHT: .............................................. 9 lbs. (4 kg)
HEIGHT:........................................ 13 1/2" (343 mm)
DIAMETER:........................................ 3 1/8" (79 mm)
DISCHARGE:...................................,... 1 1/4" NPT(F)
HOSE PORTS:....................................... 1/4" NPT (F)
PUMP CASING:................................. Stainless Steel
IMPELLER:......................................... Stainless Steel
SHAFT:............................................... Stainless Steel
MOTOR HOUSING:................................... Aluminum
SUCTION/DISCHARGE HOUSINGS:....... Aluminum
SHAFT SEAL:......................... Carbon/Ceramic (Std)
ELASTOMERS:.................................... Buna N (Std)
HYDRAULIC OIL:..... 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:........................ Max. 6 GPM (23 LPM)
OPERATING PRESSURE:. Max: 1800 PSI (122 Bar)
POWER SOURCE:..
Any Open Center Hydraulic System
SPECIFICATIONS
Specifications are subject to change without notice