CAME Rbm84 - Manual (Page 20)

cap. < 2 > pag. < 5 >
ITALIANO
Software - SYSTEM CONFIGURATION
Cap 2
In the Configuration area of the RBM84 board , set the
number of REMs connected, clicking on button [N REM]
and dragging the scroll bar
Click on [Output] ...
... and type in the OUTPUT DEFINITION
window the selected name for the outputs
connected both to the RBM84 and the REMs
3
2
This procedure is optional: by default, the
system assigns a name for each output
available in the system (from “Output 1”
a “Output 128”).( The first 8 outputs are
RBM84s and the ones after are REMs)
It is recommended, however, to name all
the outputs to make subsequent
configurations easier and safer
to adjourn
RBM84 -Software
Caution! at the end of every group of opera tions, you must update to make the changes effective
Assign a name to the RBM84- and REM-connected outputs
Select the number of REMs connected to the RBM84 board
1
1
2
4
to adjourn