CAME Rbm84 - Manual (Page 22)

cap. < 2 > pag. < 7 >
ITALIANO
Software - SYSTEM CONFIGURATION
Cap 2
RBM84 -Software
Setting traffi c lights (if present)
1
3
2
4 5
6
1-Click on TRAFFIC LIGHTS
2- select the traffic light to set.
3- Assign a name to it.
4- Assign a maximum capacity.
5- If there are occupied parking spaces during installation, simply
mark them in the ‘Occupied’ Box.
7
7- Once set, the new values must be assigned to the traffic light
Caution! At the end of every group of operations, you must update to make the changes effective
6- You can select the function type. With the Autonomous function, the traffic light is
considered independent and is therefore not counted in the
total. With the Complete function, however, the traffic light is part of a group of traffic
lights, and when everything is completed, the total will indicate this.
to adjourn