CAME Rbm84 - Manual (Page 34)

cap. < 2 > pag. < 19 >
ITALIANO
Software - SYSTEM CONFIGURATION
Cap 2
REM
OUT1
NC
NO
C
L2
L1
OUT2
NC
NO
C
Select the output and associate it to one of
the names/devices appearing in the pull-
down menu
In the Local Outputs area of the REM board, for
both the outputs the function type must
be programmed
along with any interval of relay activation;
If there are no automations connected, select or
leave “Disabled” as supported by the menu.
In the pull-down menu of the Local Outputs area , appear as default the eight traffi c light outputs
and the normal outputs defined in Assign Output Nameas well as an output called Alarm and one
called Intrusion alarm;
The exit device matching is independent of the physical connection of the latter on RBM84 or REM.
The output number corresponds exactly to the device connected to the terminal board labelled with the
same number; see figure
RBM84 -Software
Confi guring the REM outputs
Activating the REM outputs