Clear-Com RS-603 (No longer available) - Manual (Page 48)

V - P A C K I N S T R U C T I O N M A N U A L 6 - 4
SETUP ACCESSIBILITY OPTIONS
The Setup Accessibility area of the screen presents a list of several onboard
beltpack options for which you can restrict a beltpack user’s access.
By default these options are available. To make an option unavailable, clear its
check box by clicking it. To restore an option, click the option’s check box, or
restore the factory default settings.
M ODE S ELECT A CCESS
When you clear the Mode Select Access check box, a beltpack user cannot select
among modes with the beltpack’s onboard controls.
L ATCH D ISABLE A CCESS
When you clear the Latch Disable Access check box, a beltpack user cannot
access the talk button’s “latching” feature with the beltpack’s onboard controls.
T ALK D ISABLE A CCESS
When you clear the Talk Disable check box, a beltpack user cannot access the
beltpack’s talk function with the beltpack’s onboard controls.
C HANNEL R EVERSE A CCESS
When you clear the Channel Reverse Access check box, a beltpack user cannot
reverse channel positions on a beltpack with the beltpack’s onboard controls.
C ALL T ONE A CCESS
When you clear the Call Tone Access check box, a beltpack user cannot select
from the beltpack’s onboard controls to receive an incoming call signal as a tone.
E LECTRET /D YNAMIC M ICROPHONE A CCESS
When you clear the Electret/Dynamic Microphone Access check box, a beltpack
user cannot select between Electret and Dynamic microphone operation by using
the onboard beltpack controls.
C HANNEL E XCLUSIVE A CCESS
When you clear the Channel Exclusive Access check box, a beltpack user cannot
access the Channel Exclusive option from the beltpack’s onboard controls.
The Channel Exclusive option allows you to operate a dual-channel beltpack
with only one of the two available channels. When you select this option, either
channel’s call and talk buttons work only for the selected channel. The listen level
knob and call light for the deselected channel do not function.
C ALL ON T ALK A CCESS
When you clear the Call-on-Talk Access check box, a beltpack user cannot select
the Call-on-Talk option with the beltpack’s onboard controls. The Call-on-Talk
option causes a call signal to transmit each time a beltpack user presses the
beltpack’s talk button.