Clear-Com HX System Frames User Manual
Eclipse hx-pico user guide
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1 Important Safety Instructions
- 2 Introduction
- 3 Overview
- 4 Installing the Eclipse HX-PiCo
- 4.1 Preparing to install the Eclipse HX-PiCo
- 4.2 Installing the Eclipse HX-PiCo
- 4.3 Connecting the Eclipse HX-PiCo to external devices
- 4.4 Connecting user panels and interface modules
- 4.5 Wiring schemes
- 4.5.1 4-Pair analog
- 4.5.2 2-Pair analog
- 4.5.3 Single-Pair Digital
- 4.5.4 Connections using General-Purpose Outputs
- 4.5.5 Connections using General-Purpose Inputs (GPIs)
- 4.5.6 Connecting to a GPI/RLY Interface
- 4.5.7 Connecting to another Eclipse HX-PiCo (PiCo-Link)
- 4.5.8 Connecting to a LAN (Local Area Network)
- 4.6 Connecting to an external PC running EHX
- 5 Using the Eclipse HX-PiCo
- 5.1 Accessing the Eclipse HX-PiCo menu system
- 5.2 Checking port status
- 5.3 Adjusting audio levels
- 5.4 Creating audio routes
- 5.5 Selecting and activating a configuration map
- 5.6 Setting the IP address for the Eclipse HX-PiCo
- 5.7 Accessing system information
- 5.8 Accessing system status
- 5.9 Selecting a source of Identification Tone
- 5.10 Resetting the system
- 5.11 Checking the status of General Purpose Inputs (GPIs)
- 5.12 Checking the status of General Purpose Outputs (GPOs)
- 6 Maintaining the Eclipse HX-PiCo
- 7 Specifications
- 8 Menu Map for the Eclipse HX-PiCo
- 9 Glossary