Clear-Com HME DX300ES - Manual (Page 24)

21
Changing Batteries
Beltpac batteries typically provide 20 hours of continuous use in listen mode.
If you hear “Change battery” in your headset
―
1
If using beltpac, remove it from its pouch.
2
On beltpac or all-in-one headset, slide battery release latch
in direction of arrow.
3
Lift battery out of beltpac or all-in-one headset.
4
Place battery in battery charger port for recharging.
5
Install fully charged battery in beltpac or all-in-one headset.
6
If using beltpac, put it back in its pouch.
Battery
Battery
release
latch
Beltpac
Battery
Battery
release
latch
All-in-one headset