Clear-Com WTR-670 - Manual (Page 42)

Scan
Scan performs a frequency scan of the factory-defined and
any set-up user-programmable groups in order to find the
clearest group. After about 30 seconds, the clearest group is
displayed. A group is defined by the receive frequency. The
next best group and so forth may be accessed with the
[DOWN] and [UP] arrow buttons.
•
Press and hold [MENU] + [SET] for three seconds to en-
ter Scan. The beltpack will now start searching for the
clearest groups. The group symbol will flash indicating
the beltpack is scanning for clear groups.
•
Scan will scan all groups. It will then display the 1 st
group it came to that had the clearest receive channel. The
[UP] / [DOWN] buttons may be used to select the next
best group and so forth. Hit [SET] to place the beltpack
on this group and return to the group/channel screen.
6-17
END
04b 01
GP CH
Clr Scn
GP
04b Scn
GP
[SET]
Scan