Clear-Com FreeSpeak - Manual (Page 38)

CellCom/FreeSpeak Firmware Update Procedures
Rev: 6.05 VGC Part No.- 810372Z-MAN-6 Page 38 of 49
Select the CPU Crystal Frequency as specified in the instructions
– current settings
shown below.
Beltpack
– 10.36MHz
Antenna
– 10.36MHz
Splitter
– 16.38MHz
Set connection mode as specified in the instructions – BOOT mode for all
applications
Set the recommended speed as specified in the instructions
– currently 19200 fro all
applications (note you will need to deselect the „use default‟ check box allow this to
be set).