Connect a dual monitor, Connect optional devices – Hach-Lange POLYMETRON 9611 sc Installation User Manual
Page 15
Advertising
Connect a dual monitor
An external sc controller can connect to the analyzer. Connect a Hach
cable 6789400 to the external sc controller and the dual monitor
connection of the analyzer. Refer to
on page 12.
Connect optional devices
Install the cables for output or input devices as shown in
.
Make sure to use the wire gauge that is specified for the connection.
Refer to
on page 3. To configure a device, refer to the
operations manual.
Figure 13 Device connection
English 15
Advertising