Hach-Lange POLYMETRON 9611 sc Installation - Manual (Page 18)

Install the stir bar
A stir bar is included in the installation kit. Prior to the installation,
remove the funnel cover, funnel and colorimeter cover. Refer to
Figure 16 . Install the stir bar in the sample cell of the colorimeter as
shown in the illustrated steps. Refer to Figure 17 .
Figure 16 Colorimeter cover and funnel removal
Figure 17 Stir bar installation
Preparation for use
The physical installation is now complete. Refer to the operations
manual to set up the analyzer for the first use.
18 English