Message.out.calibration" item, Measure.errors" item – Hach-Lange ORBISPHERE 6110 OPC Instruction Manual User Manual
Page 11
"Message.Out.Calibration" item
The item "Calibration" is considered as Level 1 in the three level hierarchy described in
on page 5.
Level 2
Level 3
Version of the calibration data structure
TC sensor
Date
Operator
Validity date
Check flag
O2 EC sensor
Date
Operator
Validity date
Check flag
Flow meter
Date
Operator
Validity date
Check flag
Temperature sensor
Date
Operator
Validity date
Check flag
Pressure sensor
Date
Operator
Validity date
Check flag
Barometric pressure sensor
Date
Operator
Validity date
Check flag
"Measure.Errors" item
This item provides a list of any error(s) associated with the measurement. This is a flag field where
the indicated value is computed by the addition of all active errors.
Error value
Error description
0x0000
No error
0x0001
Emergency error
0x0002
Motor error
0x0004
Door error
0x0008
Cover error
0x0010
Foam error
0x0020
Flow error
0x0040
Inferior pressure
English 9