Hach-Lange UVAS sc - Manual (Page 21)

Operation
21
MAINT.PROC
OUTPUT MODE
information
REPLACE PROFILE See 5.3 Changing wiper profile, page 29
WIPERTEST
WIPE (wiping process)
DRIVE OUT WIPER
(wiper profile extends, on bypass versions
inhibited: see
5.2 Cleaning measuring path,
page 28
MOTOR CURRENT (motor current during the
wiping process)
SIGNALS
(Measurement 1/sec)
Average value
Individual measured value
Single measured value for AQS
(FACTOR = 1, OFFSET = 0)
W.POS (wiper position)
DEXT (delta extinction EM-ER)
EM (extinction measuring channel)
ER (extinction reference channel)
M (measured level)
R (reference level)
IM (intensity measuring channel)
IR (intensity reference channel)
rd (dark value reference)
md (dark value measuring channel)
extd (dark value extinction )
MOIST
OUTPUT MODE
Behaviour of the instrument outputs when the
Maint.Proc. menu is opened
4.4.2 SENSOR setup
SELECT SENSOR (if there is more than one sensor)