4 introduction, 5 selecting a stored test, 4 introduction 1.5 selecting a stored test – Hach-Lange DR 5000 drinking water analysis, supplementary software LZV571 User Manual
Page 7
7
General information
1.4 Introduction
The LZV 571 Supplementary Software for Drinking Water Analysis
is a collection of all spectrophotometric applications that are of
relevance for drinking water analysis. What is special about these
methods is that the individual parameters can be determined simply
from the intrinsic absorbance at different wavelengths, without the
addition of reagents. For many analyses, the sipper module can be
used to carry out the tests more conveniently.
1.5 Selecting a stored test
1.
Select
Stored Programs
in the "Main Menu". An alphabetically
sorted list of all available tests is displayed.
2.
Select a test by touching the corresponding line.
Note:
Use the scroll bar to run quickly through the list.
Note:
If you already know the number of the desired test, touch
Select by
Number
. Use the alphanumeric keypad to enter the test number and
confirm your input by touching
OK
.
3.
Touch
Start
to start the test program.