Delete a sensor from the list, Operation, Prognosys indicator bars – Hach-Lange PROGNOSYS User Manual
Page 9: Figure 3, 7 or, Figure 4
Advertising
Figure 3 Sort the sensors
1 Select sensor
2 UP and DOWN arrows
Delete a sensor from the list
To delete a selected sensor from the list, push Delete. Refer to
.
Figure 4 Delete a sensor
1 Select sensor
3 Delete the sensor
2 Go back without changes
Operation
PROGNOSYS indicator bars
If PROGNOSYS is installed, two additional horizontal bars show in the top right-hand corner of the
measurement screen. The top bar is the measurement value indicator. The bottom bar is the service
indicator. If no bars show up, refer to
on page 17. The position of the cursor and
the value in the indicator identifies the sensor status. Refer to
.
English 7
Advertising