Hach-Lange TITRALAB Short-form Reminders - Manual (Page 13)

Running methods
Run your analyses
Run
2(*).
Form no. 6
Enter User ID and temperature, if required,
and confirm
3(*).
Enter Sample ID, sample amount
and confirm
4(*). Rinse electrode(s) and dip electrode(s) in beaker then confirm
1
STU
1
STU
1
STU
1.
1
STU
To run your selected method
5. The measurement starts
(*) In “Run sample start = Shortcut” mode, steps 2, 3
and 4 and are chained automatically:
1. Rinse and dip electrodes in beaker .
2.
1
STU
To start
measurements.