Ph electrode calibration, Calibrate your electrode, Form no. 4 – Hach-Lange TITRALAB Short-form Reminders User Manual
Page 9
Advertising
pH electrode calibration
Calibrate your electrode
Run calibration
2.
Form no. 4
1.
1
STU
Enter Electrode
window
1
STU
To run the calibration
3.
Enter User ID and temperature, if required,
and confirm
1
STU
4.
5. Rinse electrode(s) and dip
in beaker
1
STU
6. The measurement starts
Confirm
Calibration can be performed
on up to 5 buffers.
Advertising