INTELLINET NETWORK IDC-862 Hardware Installation Guide - Manual (Page 5)

LED Indicators
LED Color Indication
Network Blue Network activity is indicated by a flashing blue LED.
Power
Red Steady red during booting up process
Blue Turns blue upon completion of start-up
Purple Flashing during firmware upgrade
Unlit Off when press reset button is pressed
Hardware Installation
1) To open the camera housing use one hand to hold top cover and another hand to
push against the bottom of the camera housing.
2) Shift top cover to left (counter-clockwise) to open the dome cover. The cover will
not easily come off unless you apply a certain amount of force.