INTELLINET NETWORK IDC-862 Hardware Installation Guide - Manual (Page 8)

Cable Connections
Power over Ethernet (PoE)
Using a standard RJ-45 network cable, connect the dome camera to a
IEEE802.3af/at compliant PoE switch or PoE injector.
RJ-45 Cable
Due to the very compact housing dimensions, using a network cable with
a molded boot is not advisable. There is not enough room to connect the
RJ45 connector to the socket without bending the cable, which will likely
short the lifespan. We recommend using a network cable without a
modeled strain relief boot.
Accessing the camera
Start the IP Installer application to set up the camera. More information
can be found in the user manual on the installation CD.