INTELLINET NETWORK 525282 iStream HD Wireless Media Adapter User Manual - Manual (Page 21)

- 21 -
The Restore to Factory Default function should be used if you wish to overwrite the
entire configuration with the original factory default values. This is recommended
after you upgrade the firmware.
Click the “Reset” button to start the process and confirm your decision by clicking
“OK” when you see this dialog:
From time to time there may be new firmware available for the iStream HD.
In order to install new firmware, proceed as follows:
1. Click “Browse…” to locate the firmware (.BIN file).
2. Click “Apply.”
3. Confirm the message “Do you wish to begin the firmware upgrade?”
4. Confirm the second message shown below:
5. The upgrade will begin now. During the process the iStream HD will display
several messages for you.