INTELLINET NETWORK 525282 iStream HD Wireless Media Adapter User Manual - Manual (Page 27)

- 27 -
ADDENDUM
PlayStation3 Network Setup
1. Connect an Ethernet cable from the iStream network port to the PS3
system.
2. Select (Settings) > (Network Settings).
3. Select [Internet Connection Settings].
Select [Yes] when a confirmation screen is displayed stating that you will be
disconnected from the Internet.
4. Select [Custom].
5. Select “Wired Connection” as the connection method.
6. Select “Auto-Detect.”
7. Addition settings you may need to confirm:
- IP address settings: set to “Automatic.”
- DHCP host name: set to “Do Not Set.”
- DNS settings: set to “Automatic.”
- MTU should be set to “Automatic.”
- Proxy server needs to be set to “Do Not Use.”
- UPnP should be enabled.
Xbox 360 Network Setup
1. Press the Guide button on your controller (Xbox button in the center of your
controller).
2. Go to Settings, and then select “System Settings.”
3. Select “Network Settings.”
4. Select “Wired Network” if you are prompted to do so.