intimus Confidential - Manual (Page 4)

<< The machine may not be operated by more
than one person at any given time!
The machine was designed for safe operation
by “one person only”.
<< During the shredding process no other
work may be performed on the machine
(for example cleaning, etc.)!
<< The machine is not a toy, and is not suitable
for use by children!
The overall technical safety concept of
this machine (dimensions, feed openings,
emergency shutdown devices etc.) does not
provide for any guarantee regarding hazard-
free operation by children.
<< Danger of injury! Keep all
loose articles of clothing, ties,
jewelery, long hair or other loose
objects away from opening!
<< Danger of injury! Never insert fingers into
opening!
<< In case of danger switch the machine off
with the mains switch, or with the emer-
gency switch, or unplug the machine!
<< Always unplug the machine from the
mains power supply before opening the
machine!
Repairs may only be performed by trained
personnel!
IMPORTANT SAFETY NOTES
OPERATING THE MACHINE:
Turn machine on with pushbutton switch (1) (fig.
1). Pilot lamp lights up (5) (fig. 1).
MATERIAL FEED:
Feed paper into the cutting mechanism through
the paper feed slot (7) (Fig. 2).
Feed data carriers (CD, DVD or credit card)
into the cutting mechanism individually into the
separate safety feed slot (8) (Fig. 2).
The machine automatically switches to forwards
running, draws the material in and automatically
switches off after shredding.
When shredding papers, do not shred
CD/DVD at the same time, and vice
versa!
Note: For shredding transparent films, the
machine must be manually switched to forwards
running.
Never feed the shredder with a
quantity of material exceeding the
maximum indicated. Refer to the
TECHNICAL DATA section!
Should the machine become
overloaded, follow the instructions under
“MATERIAL JAM IN MACHINE” under
“MALFUNCTIONS”.
OPERATING FUNCTIONS:
1 = Pushbutton switch „ready“ (fig. 1)
Depress this switch to start the machine or
to stop the machine.
2 = Pushbutton
„Cutting system forward“ (fig. 1)
Pressing this button starts the cutting system.
Material can now be fed to the shredder.
3 = Pushbutton
„Cutting system reverse“ (fig. 1)
Pressing this button starts the cutting system
in reverse.
4 = Light barrier (forwards running) (fig. 2)
The shredding operation starts as soon
as material is fed into one of the two feed
slots.
5 = Pilot lamp „ready“ (fig. 1)
Lights when the pushbutton switch (1) is
operated.
6 = Pilot lamp (red / yellow) (fig. 1)
a) „Receptacle full“ (red)
Lights up when the receptacle is full and
must be replaced. At the same time the
machine is automatically switched off.
b) „Motor overload“ (yellow)
Lights up when the motor has been
overloaded and has switched off. The
machine cannot be started during the
cooling down phase of the motor.
7 = Paper feed slot (fig. 2)
8 = Safety feed slot (fig. 2)
9 = Paper receptacle (fig. 3)
10 = Collection tray CD/DVD (fig. 3)
The shredder may not be used as a
step ladder or as a seat. Danger of
falling due to breakage!
SCOPE OF APPLICATION:
The intimus Confidential data shredder is
designed for shredding general printed material
and data media such as CDs, DVDs and credit
cards.
This machine should only be used for
shredding paper and credit cards and
for shredding CDs and DVDs!
Any attempt to shred other types of data
medium may result in damage to the
machine (e.g. destruction of the cutting
mechanism etc.).
INSTALLATION:
- Unpack and set machine upright.
- Plug in the machine (for instructions for the
necessary precautions see „TECHNICAL
DATA“).
The socket outlet shall be installed
near the equipment and shall be easily
accessible!
Only operate the machine in enclosed
rooms at temperatures between 10°C
and 25°C!
5 1 6 3 2
4
7
8
93405 1 08/13
OPERATION
GB
INITIATION
Translation of the Original Operation Manual
Übersetzung der Originalbetriebsanleitung
fig. 1 fig. 2
4