intimus 155 CC - Manual (Page 4)

The shredder may not be used as a step
ladder or as a seat. Danger of falling
due to breakage!
FEEDING THE PAPER:
- Turn the function switch (1) (fig. 1) in position „ “.
- Feed paper through the inlet guide to the cutting
system.
- Machine switches automatically to forward
and draws paper in. The machine switches off
automatically after shredding.
Never feed the shredder with a quantity
of paper exceeding the maximum indi-
cated in the technical details.
Should the machine be overfed, follow the
instructions under „PAPER JAM“.
EXPLANATION OF THE CONTROLS:
1 = Function switch (fig. 1)
(on / off / reverse)
This switch is for the following functions:
- position „ “
machine is ready for operation
- position „ “
machine is switched off
- position „ “
cutting blades are reversing
2 = Light barrier (forward run) (fig. 1)
The shredding operation is started as soon
as a sheet of paper passes through the feed
slot.
SCOPE OF APPLICATION:
The document shredder
intimus 155 / 155CC is
a machine for the destruction of common written
material.
The unit should only be fed with
paper!
Shredding other types of materials can
cause injuries (e.g. by splinters of hard
materials) or may damage the shredder
(e.g. destruction of the cutting system).
INSTALLATION:
- Assemble the unit as per the Assembly Instruc-
tions below.
- Plug in the machine (for instructions for the
necessary precautions see „TECHNICAL
DATA“.
The socket outlet shall be installed
near the equipment and shall be easily
accessible!
Only operate the machine in enclosed
rooms at temperatures between 10°C
and 25°C!
IMPORTANT SAFETY NOTES
EMPTYING THE RECEPTACLE (Fig. 3):
Turn the function switch in position „ “. Empty
the receptacle as follows:
- Remove the receptacle from in front of the
machine and empty its contents.
- Replace the empty receptacle under the machine
and push all the way to the back.
Note: The machine will only run when the recepta-
cle is pushed completely under the machine.
<< The machine may not be operated by more
than one person at any given time!
The machine was designed for safe operation
by “one person only”.
<< During the shredding process no other
work may be performed on the machine
(for example cleaning, etc.)!
<< The machine is not a toy, and is not suitable
for use by children!
The overall technical safety concept of
this machine (dimensions, feed openings,
emergency shutdown devices etc.) does not
provide for any guarantee regarding hazard-
free operation by children.
<< Danger of injury! Keep all
loose articles of clothing, ties,
jewelery, long hair or other loose
objects away from opening!
<< Danger of injury! Never insert fingers into
opening!
<< In case of danger switch the machine off
with the mains switch, or with the emer-
gency switch, or unplug the machine!
<< Always unplug the machine from the
mains power supply before opening the
machine!
Repairs may only be performed by trained
personnel!
4
OPERATION
INITIATION
155 155CC
GB
fig. 1 fig. 2
2
fig. 3
1