King Technology SPA FROG In-Line System - Manual (Page 7)

1. Run filtration system as directed by your spa
manufacturer to maintain proper water flow through
the SPA FROG In-Line System.
2. Regularly test water for pH, total alkalinity and
bromine levels with the precise FROG Brand Test Strips.
Maintain at least 1.0 ppm bromine level at all times.
3. Shock the spa with granular chlorine or a non-chlo-
rine shock once a week or as needed. Additional
shocking may be required if the spa is under heavy
use. This is often the case when the spa is new.
4. Remember to replace your SPA FROG Mineral
Cartridge and SPA FROG Bromine Cartridges as
directed under "Adjusting and When To Replace."
5. Lubricate o-ring twice a year with a
silicone lubricant.
Regular Spa Care Procedures:
Always follow the directions for operating your particular spa.
O-ring
Daily Filter Time 250-300 300-400 400-500
One hour 2 3 4
Two hours 2 2 3
Four hours 1 2 2
24 hour @ low flow 1 2 2
Spa Size (gallons)
INITIAL START-UP SETTING
7
®
B R A N D