King Technology POOL FROG Mineral Hybrid System Analog - Manual (Page 12)

Winterizing
• Turn pump off and turn
dial to 0.
• Remove cap.
• Unscrew knob in the back
of POOL FROG ® Mineral
Hybrid Cycler. Allow all
water to drain.
• Remove the POOL FROG ®
Mineral Reservoir and discard
in trash. Even if you hear spent
minerals inside, it is no longer
effective. Replace with a new
POOL FROG
® Mineral
Reservoir in the spring.
12
COPY
COPY
COPY
COPY
xxxxx
SLICONE
LUBRICANT
1.
2.
3.
4.
5.
• Lubricate o-ring with the
silicone lubricant that came
with your
POOL FROG ®
Mineral Hybrid. DO NOT
USE petroleum based
lubricants. Replace the cap
loosely.
Just like the pool plumbing, freezing may damage the system’s
cell and flow sensor. If severe or extended periods of freezing
temperatures are possible, drain all water from the pump,
filter, and supply and return lines before any freezing conditions
occur. Remove the cell and store indoors. Then winterize the
POOL FROG
® Mineral Hybrid Cycler as follows: