KT&C KPC-ZA180NH - Manual (Page 36)

7 . O p e r a t i n g C a m e r a
6. V END
• Set the vertical starting point for motion detection area.
• Select desired position from 6 to 128 in WINDOW0~3.
• Select desired position from 0 to 7 in BLOCK.
7. SENSITIVITY
• Increase or decrease detection sensitivity value.
• Can be set from 1 (low response) to 15 (sensitive).
8. ALARM
• Select desired alert type.
• OSD : The WINDOW or BLOCK will be displayed on the screen
when motion is detected.
• SERIAL : Alert packet is transmitted via RS-485 when motion is
detected.
• OSD&SERIAL : Use OSD and SERIAL feature simultaneously.
9. INITIAL
• Initializes the changed category in MOTION DETECT menu.
•
Press the NEAR/FAR button to confirm.
SPECIAL Sub-Menu : MOTION DETECT
3 6 3 7