Clock Audio MR 88 - Manual (Page 13)

Page 13
System Functions:
Priority
There are 4 levels of priority for the channels. Each priority can be assigned
one of two modes: Priority 1 is the lowest, priority 4 the highest. Channels of
a higher priority will lock out channels of a lower priority.
•
Inclusive mode. - All microphones that are allowed to be active are
mixed to the selected output bus.
•
Exclusive mode - "First-come-first-served" mode. Only one microphone
can be on at any one time. All other microphone
channels of the same priority are locked out until the
controlling microphone goes silent. Switching between
microphone channels can be controlled from very fast,
to up to 2 seconds, depending upon application.
Last Active Channel
This feature enables the last microphone channel used to be left switched on
until a new channel is detected. This can help to keep a constant ambient
sound in a system. If used in a multiple mixer linked system all mixers need
to have this system option set.
Security Code
The 4 digit code displayed is the current security code. This can be changed
by simply turning the Rotary Control to change each digit and by pressing the
FUNCTION buttons to select the digits.