CNB IGP2035F - Manual (Page 13)

XNET User Manual
13 / 50
ITEM DESCRIPTION
User List -
Displays list of registered users.
"root" is the system’s administrator. "root" cannot be added or deleted.
Only the password for “root” can be changed.
Add -
This adds a new user.
Select “[Add_User]” tap in User List Box. To add a new user, enter
User name, Password, and User group then click Add button.
Updated User list can be viewed in User List Box.
- Up to 10 users can be added.
- Authority of different User Groups
- 『 User name』must start with alphabet and its length must be
from 1 to 16.
-『Password』length must be from 1 to 14.
Modify -
Modifies information for each user.
Select a user in User Listbox, enter new Password/ User Group, and
click modify button to save the changes.
Updated detail can be viewed in User List Box.
Remove -
Removes a user.
Select a user in User Listbox and click remove button to remove.
Updated user list can be viewed in User List Box.
User Settings
Enable
anonymous
viewing
Turns Anonymous Viewer mode on or off.
When enabled, Web Viewer can be accessed without a log-in prompt.
Save -
Applies and saves the configurations
Reset - Recalls previously saved configurations.
Please disable 『Enable anonymous viewing』function if resisted users at 『User List』
only want to monitor network camera’s live view.
Administrator Full control of the XNET system.
Operator
Refer to [Diagram 1-1]
Viewer View camera’s video signal only.