CNB IGP2035F - Manual (Page 24)

XNET User Manual
24 / 50
ITEM DESCRIPTION
Main Stream
(H.264)
Resolution
Select a resolution of the video image.
CIF | VGA | D1 | 720p | SXGA
Enable
Dual-Codec
Turns Sub Stream feature on or off. <Default : Disable>
Sub Stream output is in H.264 & MJPEG Codec.
When configuring, select Main Stream or Sub-Stream in the Live View
page.
“Enable Dual-Codec checkbox” is enabled when Codec is set up as CIF
| VGA | D1 | 720p
Frame rate
Selects Frame rate of Video.
Video Type Frame rate
NTSC 1, 5, 15, 30
PAL 1, 5, 12.5, 25
Bit rate
Control
Select bit rate mode.
CBR | VBR
Bit rate Selects bit rate for H.264 video signal.
Sub Stream
(H.264 /
MJPEG)
Codec
Selects Video Codec.
When dual-codec enabled, can be selected
H.264 | MJPEG
Resolution
Select resolution of sub stream video among QVGA | CIF | VGA | D1
depending on Main Stream’s resolution and Sub Stream’s codec.
Frame rate
Sub Stream’s frame rate is completely depending on Main Stream’s
Frame rate, so user can not modify sub stream’s frame rate.
Bit rate
Control
Select bit rate mode.
CBR | VBR
Bit rate
(H.264)
Selects bit rate for sub stream.
MJPEG
Quality
(MJPEG)
Select sub stream video quality between 10 and 100.
Video Out
Enable Video
Out
Turns the Video Out feature on or off.
<Note: Video Out is available if Main Stream’s resolution is set to 720p
or less.>
Video Format
Selects Video format at Video Out terminal between
NTSC and PAL.<Default : Enable>
Save - Applies and saves changes.
Reset - Recalls previously saved configurations.