CNB IGP2035F User Manual
Page 26
XNET User Manual
26 / 50
ITEM
DESCRIPTION
RTSP
Configuration
RTSP Port
Enter RTSP Port of the Main Stream between 1 and 65535.
The default is 554.
RTP
Configuration
RTP Start
Port
Enter RTP Start Port between 1024 and 65534.
The default is 2000.
The minimum difference between RTP Start and End Port should be 100.
RTP End Port
Enter RTP End Port between 1124 and 65535.
The default is 3000.
The minimum difference between RTP Start and End Port should be 100.
Maximum
number of
users to
connect
Enter the maximum allowable number of users connected to the Stream
between 1 and 10. However, it can be vary depending on Main Stream’s
Bit Rate.
MAX. number of users to connect = 15Mbps / Main Stream’s Bit Rate
(1<= MAX. number of users to connect <= 10)
Multicast
Configuration
TTL Value
Specify TTL for outgoing multicast
1
st
Address
Specify destination IP address for main stream
Port
Specify video port for main stream
2
nd
Address
Specify destination IP address for sub stream
Port
Specify video port for sub stream
Save
-
Applies and saves changes.
Reset
-
Recalls previously saved configurations.