Audiovox NAV3000 - Manual (Page 15)

Monitor
If mounted on the supplied support, the monitor can be removed from the holder for
advanced theft protection.
Removing the monitor
☞
Push the release button on the back of the support and gently pull the monitor
upwards.
A
Do not push on the display screen to avoid damage of the LCD.
Installing the monitor
☞
Gently slide the monitor onto the support until it clicks into position.
Adjusting the LCD monitor
If mounted on the supplied support, the monitor can be adjusted to your viewing
angle.
☞
Turn the monitor until the best angle of view is reached.
☞
Press the release button on the monitor support to tilt the monitor to its best
position.
Remote control
The Audiovox Navigation System is controlled by an infrared remote control.
☞
Press the release keys at both sides of the holder to remove the remote control.
A
Before driving off, slide the remote control back into the holder until it clicks into
position.
The keys on the remote control have the following functions:
ALT-R Plan an alternative route.
REP Repeat current acoustical guidance advice.
8
Cursor key upwards; select options.
4
Cursor key left; select options.
6
Cursor key right; select options.
2
Cursor key downwards; select options.
OK OK key; confirm a selection.
-
Decrease voice volume of guidance advice.
+
Increase voice volume of guidance advice.
MENU Show main menu.
If you use your remote control in its holder, the internal batteries are not used.
When the batteries are exhausted the navigation system may no longer react on key
presses.
☞
Slide the remote control into its holder to resume normal operation.
☞
Replace the batteries.
OPERATION
15
English