Audiovox NAV3000 - Manual (Page 29)

i4 Trip computer
The trip computer shows you the following
information:
– Current vehicle speed
– Average vehicle speed
– Elapsed travel distance
– Elapsed travel time
Resetting trip computer
☞
Select “
Settings” from the main menu.
☞
Select “
Trip computer” from the “System settings” menu.
☞
Select “
Reset Trip comp” to set all values to zero.
Speed warning
You can specify a speed limit in the trip computer. A warning signal will be heard as
soon as you exceed the specified speed.
For setting the speed limit see “Trip computer”, page 38.
i5 Current settings
Shows the current system settings and gives you the
possibilty to change the route planning criterion.
The following information is shown:
1. Selected route planning criterion
– N: Along main roads
– M: No main roads
– C: Optimize time
– V: Optimize distance
2. Status of RDS TMC
RDS TMC is not available in the U.S.
3. Audible guidance advice:
– D: Voice messages on
– F: Voice messages off
4. Time and date
GUIDANCE
29
English
Current settings i5
08:17 pm 11/02/99
Trip computer
35 mph
24 mph
235 mls
12:08 h
i4