CTI Products MCN RCD System Planner - Manual (Page 44)

Appendix C System Examples
Page 40 MCN Comparator Display System Planner
7.5 Example 5 - ASTRO-TAC Comparator with 8 Receivers
Displayed on a Console
Figure 18 shows an MCN system that provides monitoring and control of up to 8 receivers connected
to a Motorola ASTRO-TAC comparator. Since the system has only 8 receivers, only one IIB module is
required. This system assumes the following:
•
ASTRO-TAC Comparator, 8 Receivers
•
Console Interface
•
Comparators and console electronics are located within 25 feet of each other
•
The AIB and IIB modules will be rack mounted
•
North American power supply is required.
CA-80016-100
IIB
CONSOLE
ELECTRONICS
COMPARATOR
ASTROTAC
AIB
OUT
P/S
IN
CONSOLE
IN
OUT
T
T
Figure 18 - 8 ASTRO-TAC Receivers with Console Display
(P/S = Power Supply, T = Network Terminator)
This is an easy system to order since there is a packaged model for an 8-receiver ASTRO-TAC
comparator with console display: Order the following items:
Equipment List for Example System 5
Item Model/Option Description Qty
1 CDN6119 ASTRO-TAC AIB Module
(Order from Motorola) 1
2 CDN6131 AIB to ASTRO-TAC cable (10 ft.)
(Order from Motorola) 1
3 S2-60433 IIB Input/Output Interface Module (8 Rx) 1
4 S2-60435 Quad Rack Mount Size A (1 Rack Unit high) 1
5 89-10837 Cable Assy 25 pr M-M 25' (for IIB) 1
6 31-10354 Punch Block, 50-Pair (for IIB) 1
7 S2-60438 9” Network Cable 1
8 S2-60318 Terminator (1 each) 2
8 81-10398 Power Supply N. American 1
Be sure that the console CEB has (2) B1426 Comparator Interface Modules.
For button and LED consoles, be sure that the operator positions have the proper number of B1439
Comparator Status Display Modules.