CTI Products MCN Server 8000 - Manual (Page 85)

MCNConfig Program: Network Interface Window
85 68-12286-110
Adding a Network Interface – HIB-IP 8000
Adding a HIB-IP 8000 is similar to adding a legacy HIB-IP unit. The difference is shown in the HIB-IP
configuration window below:
Port
Whereas the legacy HIB-IP units have fixed destination UDP Port numbers, the HIB-IP 8000
units have a selectable destination Port ID. This enables them to be used in wide area networks
that use specific UDP Port addresses for filtering.
Current selections are:
•
•
HIB-IP For Legacy support or
•
HIB-IP 8000 To support MSI Astro™25 RNI Version 7.13 and up
User-defined port numbers will be available in a future release.
Select the appropriate port for your application