Operation and maintenance, Maintenance, Warning – Controlled Products Systems Group LA400-S User Manual

Page 23: Save these instructions, Warning caution warning warning

Advertising
background image

23

External entrapment
protection systems

Check for proper operation

Gate warning signs

Make sure they are present

Manual disconnect

Check and operate

Gate

Inspect for wear or damage

Accessories

Check all for proper operation

Electrical

Inspect all wire connections

Frame bolts

Check for tightness

Total unit

Inspect for wear or damage

6 MONTHS

3 MONTHS

12 MONTHS

TASK

CHECK AT LEAST ONCE EVERY

Complete Check Out

NOTES:

1. Disconnect power before servicing.

2. Severe or high cycle usage will require more frequent

maintenance checks.

3. Inspection and service should always be performed anytime a

malfunction is observed or suspected.

4. When servicing, please do some “house cleaning” of the

operator and the area around the operator. Pick up any debris
in the area. Clean the operator as needed.

5. It is suggested that while at the site voltage readings be taken

at the operator. Using a Digital Voltmeter, verify that the
incoming voltage to the operator it is within ten percent of the
operators rating.

DESCRIPTION

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of SEVERE INJURY or DEATH:

1. READ AND FOLLOW ALL INSTRUCTIONS.
2. NEVER let children operate or play with gate controls.

Keep the remote control away from children.

3. ALWAYS keep people and objects away from the gate.

NO ONE SHOULD CROSS THE PATH OF THE MOVING
GATE.

4. Test the gate operator monthly. The gate MUST reverse

on contact with a rigid object or stop when an object
activates the non-contact sensors. After adjusting the
force or the limit of travel, retest the gate operator.
Failure to adjust and retest the gate operator properly
can increase the risk of INJURY or DEATH.

5. Use the emergency release ONLY when the gate is not

moving.

6. KEEP GATES PROPERLY MAINTAINED. Read the

owner’s manual. Have a qualified service person make
repairs to gate hardware.

7. The entrance is for vehicles ONLY. Pedestrians MUST

use separate entrance.

8. Disconnect ALL power BEFORE performing ANY

maintenance.

9. ALL maintenance MUST be performed by a LiftMaster

professional.

10.

SAVE THESE INSTRUCTIONS.

WARNING

WARNING

WARNING

MAINTENANCE

MONTH

To reduce the risk of FIRE or INJURY to persons, use ONLY
Chamberlain part #K74-30762 for replacement batteries.

WARNING

CAUTION

WARNING

WARNING

O P E R A T I O N A N D M A I N T E N A N C E

Advertising