American Access Systems PhoneLink - Manual (Page 5)

Page 5 American Access Systems / Security Brands, Inc.
Introduction
The American Access Systems (AAS) PhoneLink unit is a well-built, reliable telephone entry system. The heavy gauge,
powder-coated enclosure with stainless steel faceplate, mounts directly to a pedestal or can be surface mounted.
Before Installation
To take full advantage of the 24-month limited warranty, you must register with American Access Systems, Inc. Please
read and review the Warranty (page 3), complete the enclosed Warranty Registration card and send it to:
Security Brands, Inc.
Warranty Registration
1675 West Yale Ave.
Englewood, CO 80110
Important Tips
1. The PhoneLink unit contains static sensitive components. Use proper grounding techniques during installation to
prevent damage to circuit board. 2. 3. Additional surge protection is highly recommended to provide extra lightning
protection. Electrical Safety Advisory Notice: American Access Systems, Inc. recommends the installation of an AC
surge arrestor in the AC outlet from which the equipment is powered. 4. 5. Please follow the instructions in this manual
carefully to prevent problems during installation and programming.6. 7. American Access Systems cannot guarantee
compatibly with all telephones and accessories (answering machines, caller ID, etc.)
Installation
Proper wire size is necessary for a good and trouble-free installation. Follow the tables below for your installation.
DC Power Wire Size Distance (in feet) AC Power Wire Size
18 AWG 30’ or less 18 AWG
18 AWG 30’ to 75’ 16 AWG
18 AWG 75’ to 150’ 12 AWG
16 AWG 150’ to 250’ 10 AWG
12 AWG 250’ to 500” N/A
Wiring from Bypass Board Type of Wire Recommended
To Telco Box 18 to 24 Gauge twisted pair
shielded Belden #9502 or equivalent
To PhoneLink Controller 18 to 24 Gauge twisted pair
shielded Belden #9502 or equivalent
Wiring from PhoneLink Type of Wire Recommended
To the 12V AC/DC power source 2 conductor cable 18 gauge stranded
To gate operator, door strike, or
magnetic strike 2 conductor cable Device manufacturer specs
To door strike power supply(if used) 2 conductor cable Device manufacturer specs
To earth ground 12 AWG copper wire Belden #9912 or equivalent
1675 West Yale Ave.
Englewood, CO 80110
phone: 303-799-9757
fax: 303-799-9756
[email protected]
www.securitybrandsinc.com
SECURITY BRANDS INC