American Access Systems PhoneAire - 16-1050 - Manual (Page 6)

Page 6 American Access Systems / Security Brands, Inc.
Qty description
1 16-1050 control station Transmitter (w/2keys)
1 16-1050 receiver unit
1 12VAc Adapter
4 ¼”-20 X ½” carriage bolts
4 ¼”-20 hex nuts
if any of the above items are missing from this box, contact American Access systems
Tools needed For Basic installation
• • Wire nuts or appropriate terminals/connectors
• • Wire strippers
• • Wire cutters
• • 3/8” drive ratchet with 6” extension and 7/16” socket
• • Digital or Analog multi-meter
• • Drill
PArTs checklisT
Parts that are included in the box include the following items. If any of the items is missing, contact American Access
Systems (AAS).
BeFore Proceeding
To take full advantage of the 24 month limited warranty, you must be registered with American Access Systems.
Please read the enclosed warranty statement, (pg 2), fill out the warranty registration card provided and send it to:
1675 West yale Ave.
englewood, co 80110
phone: 303-799-9757
fax: 303-799-9756
[email protected]
www.securitybrandsinc.com
SECURITY BRANDS INC
introduction
The American Access Systems (AAS) unit is a fully digital, wireless telephone entry system featuring Push to Talk (PTT)
technology. The heavy gauge, powder-coated transmitter enclosure with stainless steel faceplate, mounts directly to
a pedestal or can be surface mounted.
The receiver is contained by of a weather-tight, baked enamel enclosure that mounts directly to the side of the home
or main building. The “No Phone Line” entry system allows the use of an existing telephone line. There is no need for
an additional “dedicated” phone line.