Asus Pedestal/5U Rackmount Server TS500-E4 Server - Manual (Page 52)

Chapter 2: Hardware setup 2-30
Connect to SAS/RAID card
1. Connect the SAS cable to the
SAS control card.
2. Then connect another side of the
SAS cable to the SAS backplane.
3. The picture shows the SAS
backplane connects to SAS control
card.
• For more detailed instruction about the SAS/RAID card, refer to its
user guide.
• The pictures of the SAS/RAID card above illustrate the LSI
SAS3442X-R card only.