Impulse MAQ20-940 User Manual - Manual (Page 44)

ReDAQ
®
Shape Software for MAQ
®
20 User Manual
44
5.3.7 Gauge Tool
The Gauge Tool displays data from analog input channels in the MAQ
®
20 data acquisition system.
To change the Gauge Tool properties, double click on the device to open the Properties window. Only
the Appearance, Behavior, Layout and Scale categories contain parameters that are useful to modify
when interfacing to the MAQ
®
20.
Assign the analog input channel to display in the Gauge Tool by using the Gauge Input pull down
selection box.