Impulse 8004e - Manual (Page 19)

Optional 3093 Migration Cable (CA378)
On the 3093 ISA digital I/O board, the input pins #1 and #19 are reversed from the
standard CA165 cable that ships standard with the 8004. If you are upgrading from a
3093 ISA board to an 8004 PCI board and wish to preserve existing infrastructure
wiring, order the CA378 cable and use it in place of the standard CA165 cable.
CA378 Input Pin Assignments (DB-37 Female)
Inputs are interfaced via the DB-37 female connector on the optional CA378 cable.
Port A Bit Port A Pins Port B Bit Port B Pins
0 18,37 0 10,29
1 17,36
1 9, 28
2 16,35 2 8,27
3
15,34 3 7,26
4 14,33 4 6,25
5 13,32 5 5,24
6 12,31 6 4,23
7 11,30 7 3,22
Ground 2,20,21
+12 Volts 19
+5 Volts 1
NOTE: The CA378 cable is designed specifically for customers upgrading
from a 3093 ISA board to the 8004 PCI board. If you are not
upgrading from the 3093 board, use the standard CA165 cable that
ships with the 8004 PCI digital I/O board.
CA378 Output Pin Assignments (DB-37 Male)
Outputs are interfaced via the DB-37 male connector on the optional CA378 cable.
Port C Bit Relay Port C Pins Port D Bit Relay Port D Pins
0 K16 2,20 0 K8 10,28
1 K15 3,21 1 K7 11,29
2 K14 4,22 2 K6 12,30
3 K13 5,23 3 K5 13,31
4 K12 6,24 4 K4 14,32
5 K11 7,25 5 K3 15,33
6 K10 8,26 6 K2 16,34
7 K9 9,27 7 K1 17,35
Ground 18,36,37
+ 5 Volts 19
+ 12 Volts 1
© Sealevel Systems, Inc. - 17 - DIO-32.PCIe User Manual