Impulse 2113 - Manual (Page 4)

Before You Get Started
What’s Included
All SeaLINK DIN rail USB serial adapters ship with the following items. If any of
these items is missing or damaged, please contact Sealevel for a replacement.
SeaLINK USB Serial Adapter – (see part numbers on previous page)
CA356 – USB Type A to SeaLATCH USB Type B Cable, 6’ in Length
LB101 – DB9F Serial Loopback Adapter
Sealevel Software CD – SeaCOM Software and Documentation
Optional Items
Depending upon your application, you are likely to find one or more of the following
items useful for interfacing SeaLINK USB serial adapters.
All items can be purchased from our website ( http://www.sealevel.com ) or by calling
864-843-4343. For applicable accessories, pin out diagrams are located on the
website.
CA127 – DB9 female to DB9 male serial extension cable. Extends a DB9 serial
connection by 72”.
CA176 – DB9 female (RS-422) to DB25 male (RS-530) cable, 10” in length.
Converts Sealevel DB9 RS-422 pinout to the RS-530 DB25 pinout, useful where
RS-530 cabling already exists.
CA177 – DB9 female to DB25 male modem cable, 72” in length. A standard
RS-232 modem cable providing a convenient connection to serial peripherals
with DB25 connectors. Connects to the host system via a DB9 connector.
DB103 – DB9 female (RS-422) to DB9 female (Opto 22 Optomux) converter.
RJ9S8 – DB9 female to RJ45 modular adapter. Helpful for converting DB9
serial port to RJ45 connector for using existing CAT5 infrastructure wiring.
TB05 – A terminal block with a DB9 female connector breaking out to 9 screw
terminals. Simplifies field wiring of RS-422/485 networks with differing pin out
configurations.
TB06 – A terminal block with dual DB9 female connectors breaking out to 18
screw terminals. Simplifies field wiring of RS-422/485 networks with differing
pin out configurations.
SeaI/O-270U – Sealevel’s powered 7-port USB hub providing 1500 VAC of
optical isolation to the host system. Integrated SeaLATCH locking USB type A
& type B connectors (refer to the SeaLATCH USB section of this manual for
detailed information on SeaLATCH locking USB connectors and cables).
HUB7i – Sealevel’s powered 7-port USB hub providing up to 5500 VAC of
optical isolation to the host system.
© Sealevel Systems, Inc. - 2 - SeaLINK DIN Rail USB Serial Manual