Impulse 5103 - Manual (Page 3)

Introduction and Installation
Sealevel Systems ACB-MP.PCI Page 1
Introduction
Overview
The ACB-232.LPCI adapter provides the PC with a single channel multi-protocol serial interface utilizing the Zilog
Z85230 (ESCC™), which is suitable for the most popular communication protocols including HDLC/SDLC, X.25,
Bi-Sync, Mono-Sync, and asynchronous.
The ACB-232.LPCI is compliant with EIA/TIA-232E.
What’s Included
The ACB-232.LPCI is shipped with the following items. If any of these items are missing or damaged, contact the
supplier.
• ACB-232.LPCI Adapter
• Sealevel Software
• Standard PCI Profile Bracket
Installation
Operation System Installation
Note: For the5103 to work properly in Windows 2000, Plug and Play OS must be turned off in the BIOS.
Choose Install Software at the beginning of the CD and select Install SeaMAC.
System Installation
The ACB-232.LPCI can be installed in any of the PCI expansion slots.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available PCI slot and remove the blank metal slot cover.
4. Gently insert the ACB-232.LPCI into the slot. Make sure the adapter is seated properly.
5. Replace the screw.
6. Replace the cover.
7. Connect the power cord.
Installation is complete.