Uninstall & upgrade instructions, Ninstall, Pgrade – Impulse 7205e User Manual
Page 16: Nstructions
Uninstall & Upgrade Instructions
The SeaCOM software program adds entries to the system registry that are
necessary for specifying the operating parameters for your device. To completely
remove the hardware and associated software, follow the steps in the order they
appear.
To upgrade to the latest version of SeaCOM, follow the instructions to uninstall the
hardware and software, followed by the upgrade instructions.
Important!
Start with the hardware installed in a PCI Express slot.
Do not remove until instructed to do so.
Remove Hardware Using Device Manager
To access Device Manager, follow the steps below:
1. Right click on ‘My Computer’ icon on your desktop or in the Start menu.
2. Click ‘Manage’ in the fly out menu to launch the ‘Computer Management’
console window.
3. In the left pane under ‘System Tools’, click ‘Device Manager’.
4. In right pane near the bottom, expand the ‘Multi-port serial adapters’ section
by clicking the ‘+’ symbol.
5. Locate the ULTRA COMM+2.LPCIe device in the listing.
© Sealevel Systems, Inc.
- 14 -
COMM+2.LPCIe User Manual